Uw klantgegevens  |  Mijn verlanglijst  |  Inhoud winkelwagen  |  Afrekenen   
  Hoofdpagina » Accessoires » Focusers » Moonlite STC Focusers » MoonLite CSL 2.5 inch Large Format Crayford SCT/RC Focuser with shaftlock
Categorieën




Fabrikanten
Nieuwe producten Meer
ZWO ASI174MM-Cool 5 hole USB Wheel & 1,25 LRGB Filter Set
ZWO ASI174MM-Cool 5 hole USB Wheel & 1,25 LRGB Filter Set
1.459,00 EUR
Snel zoeken
Klantenservice
Over Robtics
Algemene voorwaarden
Privacy verklaring
Verzenden & retourneren
FAQ
Prijs check
RTT 2017
Astro-kofferbak-verkoop-dag
Neem contact op

MoonLite CSL 2.5 inch Large Format Crayford SCT/RC Focuser with shaftlock
[Moon 2,5 sct lock]

Prijs: 570,00 EUR

 

Robtics prijscheck
Product Details

MoonLite manufactures many flanges that fit a variety of different SCT, RC, and Vixen OTAs. Please use the pull down menu to select the flange located at the bottom of this page.

All current CSL flanges feature a 2 piece rotating flange design with a lock knob providing camera angle adjustment. It consist of an upper flange part and a lower flange part on a rotatable radial dove tail design. The upper flange part bolts on to the focuser body with 3 bolts. The lower flange part has the threads pattern that matches the visual back and connects in to the upper flange. The thickness and diameter of the lower flange is designed for the telescope it is to be installed on. This 2 part rotating flange system provides collimation ability using a simple 3-point push pull bolt/setscrew arraignment. Please note all focusers are factory collimated dead on before we ship them, and do not require any adjustment. The only time collimation should be changed is if the OTA has some kind of defect causing the focuser to set slanted on the tube. In this case the focuser's collimation ability would come in handy to correct the mechanical centerline collimation of the OTA in question. Flanges can be swapped on the bottom of the focuser so it will fit different OTAs. Replacement bottom flanges are sold separately for $95 if you need a different flange at a later time.

The flanges come in 8 thread sizes for SCTs and RCs. The 3 1/4" Celestron thread size, 3 1/4" Meade thread size, 4" thread size for Meade 16" scopes, RC 6" / 8" thread size, RC 10" / 12" thread size, and Vixen 260L thread size. The 3 1/4" Celestron threaded flanges fit 11" and 14" Celestron visual backs. The special taller EDGE flange fits the new 11" and 14" Celestron Edge scopes. We make a special EDGE flange for the 9.25" EDGE that has a cut shape on the bottom to clear the mirror focus knob. The 3 1/4" Meade threaded flanges fit Meade 10" ,12" and 14" Meade Visual backs. Please note; The CSL large format focuser is not intended for the smaller 8" SCT scopes due to the small 2" SCT threaded visual back. Please look at the CS 2" format size focuser for all 8" SCTs with the smaller visual back thread size. It is important to pick a matching drawtube and flange combination when configuring the MoonLite focuser. We recommend the drawtube length for each flange listed below.

  • The 3 1/4" Celestron thread regular profile flange fits 11, and 14" Celestron SCTs. It is rotatable and collimatable. The correct drawtube length for this flange are any of our 1" travel versions, including the sliding focal reducer adjustable position drawtube.
  • The The 3 1/4" Meade thread regular profile flange fits 10, 12", and 14" Meade SCTs. It is rotatable and collimatable. The correct drawtube length for this flange are any of our 1" travel versions, including the sliding focal reducer adjustable position drawtube.
  • The large 4" Meade thread flange fits only the 16" Meade SCTs with the 4" visual back. It is rotatable and collimatable. The correct drawtube length for this flange are any of our 1" travel versions, including the sliding focal reducer adjustable position drawtube.
  • Vixen flange fits the VMC260. The correct drawtube length for this flange are any of our 1" travel versions.
  • The 3 1/4" Celestron thread EDGE flange fits the EDGE 11", and 14" Celestron SCTs. It is rotatable and collimatable. The correct drawtube length for this flange are any of our 1.5" travel versions. This flange is slightly taller then the regular Celestron flange above to provide the ideal spacing / profile if the new EDGE Focal Reducers are used. Please note the EDGE focal reducers do not fit inside the focuser. The focuser threads on to the Focal reducer for all of the EDGE model scopes. The longer 1.5" travel 68mm thread top drawtube is the popular and best match for this flange.
  • The EDGE 9.25" flange is tall like the regular EDGE flange above, but has a special machined shape at the bottom to provide clearance around the Mirror focus knob on the visual back. The correct drawtube is the 1.5" travel 68mm thread top when picking this flange.
  • RC 6" / 8" flange fits the threaded visual back on RC8" and RC6" scope. It also fits the AstroTech, Orion, and GSO versions of the RC OTAs. The flange is rotatable and collimatable. The correct drawtube length is the 1.5" travel versions. This focuser threads on to the included spacer flanges that Astrotech provides to adjust the mounting position. However the longer 2" travel drawtube can also be picked if more out travel is needed for imaging set ups.
  • RC 10" /12" flange fits the threaded visual back on RC10" and RC12" scope. It also fits the AstroTech, Orion, and GSO versions of the RC OTAs. The flange is rotatable and collimatable. The correct drawtube length is the 1.5" travel versions. This focuser threads on to the included spacer flanges that Astrotech provides to adjust the mounting position. However the longer 2" travel drawtube can also be picked if more out travel is needed for imaging set ups
 Dual rate Tri-knob w/ Shaft Loc- The dual rate with SHAFT LOCK knob option adds the shaft lock system to the coarse side knob. The shaft lock option uses a unique mini brass compression ring clamp sub system that allows the user to lock the shaft and focuser's position with out deflecting the drawtube. This type of focus lock is much better then the old "thumb screw against the draw tube" style that would shift the image when pressed against the draw tube. The shaft lock ability along with the 6 lb heavy-duty reduction unit make this option ideal for heavy demanding loads for both visual and imaging requirements. The fine knob is on the right by default, but can be made a lefty if needed. The whole point of the shaft lock option is to precisely lock focus position with no shift in image or change in focus
 
Extra afbeeldingen

Stel een vraag

 Beoordelingen 
Momenteel wordt bekeken:  MoonLite CSL 2.5 inch Large Format Crayford SCT/RC Focuser with shaftlock
Talen
Nederlands English Deutsch
Verzending Meer
Review schrijvenGratis verzending vanaf 250 euro!
Winkelwagen Meer
Uw winkelwagen
is leeg
Informatie over de fabrikant
Moonlite
Andere artikelen
Notificaties Meer
NotificatiesHoud mij op de hoogte van updates voor MoonLite CSL 2.5 inch Large Format Crayford SCT/RC Focuser with shaftlock
Aanbiedingen Meer
Sky-Watcher SWA-70 (2") 22mm eyepiece
Sky-Watcher SWA-70 (2") 22mm eyepiece
135,00 EUR
131,00 EUR
Bekijk alle aanbiedingen
Beoordelingen Meer
Review schrijvenSchrijf een beoordeling over dit artikel!
Handleidingen Meer
Review schrijvenOp zoek naar Moonlite handleidingen? Raadpleeg ons archief met handleidingen!
telescoop sterrenkijker winkel  telescopen sterrenkijkers kopen

Copyright © 2017 Robtics