List of products by brand PrimaLuceLab

Showing 1-24 of 193 item(s)

Mounting Hardware

Losmandy PLUS dovetail bar with curved blocks for C8 or EdgeHD 800 telescop

PLL_PLLLOS350SAG8

0 Review(s)

€154.00

Power Supplies

PrimaLuceLab 0,5m Eagle power cable extension cord

PLL_PL1000054

0 Review(s)

€45.00

0,5m PrimaLuceLab Eagle power cable extension cord is used when you need a longer cable to power devices through the PrimaLuceLab EAGLE.

Power Supplies

PrimaLuceLab 1,0m Eagle power cable extension cord 3A-8A

PLL_PL1000053

0 Review(s)

€46.00

PrimaLuceLab 1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

PrimaLuceLab 100mm PLUS support rings - 1

Accessories

PrimaLuceLab 100mm PLUS support rings

PLL_PLLANSU100P

0 Review(s)

€198.00

The PrimaLuceLab 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of...

Mounting Hardware

PrimaLuceLab 105mm PLUS support rings

PLL_PLLANSU105P

0 Review(s)

€205.00

The PrimaLuceLab 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS...

PrimaLuceLab 115mm PLUS support rings - 1

Accessories

PrimaLuceLab 115mm PLUS support rings

PLL_PLLANSU115P

0 Review(s)

€215.00

The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...

Power Supplies

PrimaLuceLab 12,8V AC adapter for EAGLE - 12A

PLL_PL1000024

0 Review(s)

€125.00

If you want to power PrimaLuceLab EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12V power supply comes with a screw connector for EAGLE on one side and a plug for the socket on the other (compatible with 100 to 240V), with USA and UK...

Accessories

PrimaLuceLab 125mm PLUS support rings

PLL_PLLANSU125P

0 Review(s)

€225.00

The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi...

Power Supplies

PrimaLuceLab 12V AC adapter for EAGLE - 5A

PLL_PL1000025

0 Review(s)

€45.00

Power Supplies

PrimaLuceLab 12V power cable with banana plugs for Eagle - 250cm

PLL_PL1000028

0 Review(s)

€45.00

In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.

Power Supplies

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

PLL_PL1000029

0 Review(s)

€49.00

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

Mounting Hardware

PrimaLuceLab 131mm PLUS support rings

PLL_PLLANSU131P

0 Review(s)

€248.00

The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED.Like all...

Accessories

PrimaLuceLab 134mm PLUS support rings

PLL_PLLANSU134P

0 Review(s)

€250.00

The PrimaLuceLab 134mm PLUS support rings are designed telescopes with tube approximately 134mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands.Like all the other elements of the PLUS series,...

Accessories

PrimaLuceLab 140mm PLUS support rings

PLL_PLLANSU140P

0 Review(s)

€265.00

The PrimaLuceLab 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high mechanical...

Mounting Hardware

PrimaLuceLab 145mm PLUS support rings

PLL_PLLANSU145P

0 Review(s)

€275.00

The PrimaLuceLab 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high mechanical...

Mounting Hardware

PrimaLuceLab 150mm PLUS support rings

PLL_PLLANSU150P

0 Review(s)

€290.00

PrimaLuceLab 150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

Mounting Hardware

PrimaLuceLab 155mm PLUS support rings

PLL_PLLANSU155P

0 Review(s)

€295.00

PrimaLuceLab 155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide...

Mounting Hardware

PrimaLuceLab 168mm PLUS support rings

PLL_PLLANSU168P

0 Review(s)

€315.00

The PrimaLuceLab 168mm PLUS support rings are designed for telescopes with tube approximately 168mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high mechanical...

Mounting Hardware

PrimaLuceLab 180mm PLUS support rings

PLL_PLLANSU180P

0 Review(s)

€335.00

The PrimaLuceLab 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high...

Corrective Optics

PrimaLuceLab 2" field flattener for AIRY BLACK

PLL_PLLFLATBLACK

0 Review(s)

€79.00

The 2" field flattener for AIRY BLACK is specially designed for our AIRY BLACK apochromatic refractors and it generate a very large flat field, to use with cameras with big sensors, up to APS-C. In this way, the pictures will be perfect, with pinpoint stars up to the edge of the field!This flattener is directly screwed to the thread back on the focuser's...

Adapters

PrimaLuceLab 2" nosepiece for ARCO 2"

PLL_PL3600413

0 Review(s)

€0.00

2" nosepiece for PrimaLuceLab ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

View

Adapters

PrimaLuceLab 2" visual back for ESATTO 2"

PLL_PL8410001

0 Review(s)

€85.00

If you want to use your telescope visually with PrimaLuceLab ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for...

Adapters

PrimaLuceLab 2" visual back for ESATTO 3"

PLL_PL8410002

0 Review(s)

€85.00

If you want to use your telescope visually with PrimaLuceLab ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation)...

Mounting Hardware

PrimaLuceLab 235mm PLUS support rings

PLL_PLLANSU235P

0 Review(s)

€395.00

PrimaLuceLab 235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings.Like all the other elements of the PLUS series, these rings are made with high mechanical...