Dew-Not dual channel controller for dew heaters

Introducing Dew-Not's new Dual Channel Controller. The DNC01 controller is a dual channel controller based on PWM (pulse width modulation) technology. Each channel controls two outputs for a total of four outputs. Each channel is capable of a duty cycle from 5% on time (effectively off) to 95% on time at the high setting. Best results are normally achieved with an initial setting between medium and high.

The DNC01 is manufactured for operation on 12 volts DC and should never be operated with any other voltage. Total amperage capacity for all four outputs is 5 amps. The controller is supplied with a six foot cord equipped with a cigarette lighter plug end. A 5 amp fuse is incorporated into the plug - to access the fuse, turn the knurled knob on the plug counter clockwise.

The green LED indicated that the controller is getting power. The two amber lights by the outputs indicate the power level of each channel. The brighter the amber LEDs, the higher the duty cycle for that channel.

Specification:

Dew-Not dual channel controller for dew heaters:

• Controller for heater elements;
• Two channels;
• Four outputs;
• Power LED;
• Two power level LED's;
• Six foot (1.8 meter) cord;
  
• Car cigarette lighter plug;
• 5 ampere fuse.