×
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel
Robtics QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel

QHY90A 8.6mega pixels 4/3 inch astronomy CCD camera with Filterwheel

QHY 90 A
3.200,00 €
Impuestos incluidos

Tiene una pregunta acerca de este producto?
 

A" Series Camera - Fully Integrated

Both QHY90A and IC90A belong to QHYCCD new "A" series camera family. "A" stands for "ALL-IN-ONE". It includes a built-in motor driven filter wheel and it natively supports the QHYOAG. The OAG can be installed on the camera solidly with six screws at minimum back focus, precious for some optical systems.

The filter wheel in QHY90A/IC90A is 7 positions for unmounted 36mm filters. The camera compatible with the small size QHYOAG.

Besides the filter wheel and OAG, "A" series camera has more to offer. An internal USBHUB(2.0) provides two USB host port and a USB to dual RS232 coverter. Guiding camera, mount and electric focuser can be connected directly to this camera instead of the computer to reduce cable clutter and chance of signal loss due to the long cables. Only one USB cable to rule them all

 

"Butterfly Shutter - unlimited life and uniform illumenation

This camera uses a mechanical shutter looks like butterfly shape. This shutter is driven by motor directly and it is only one piece with no friction to others. The working life is almost unlimited. This shutter has two side to cover the light. One is left to open the shutter. and another is enter to close the shutter. It has a uniform illumination feature.


Single 12V power socket
This camera uses the single 12V to power. The power socket has the thread, it can connect with the DC plugs with thread lock to get solid connection. There is another socket which is connected with the input in parallel. It can supply the 12V to other device nearby.


Specification:

CCD Sensor
KAF8300 Mono, Standard Grade
Effective Pixels
3358(H)*2536(V) 8.6mega pixels
Pixel Size
5.4um*5.4um
Effective Area
17.96mm(H)*13.52mm(V), Typical 4/3inch
Readout Type
Full Frame CCD, Progressive Scan
FullWell
>25.5ke
Anti-Blooming gate
Yes, 100X
ADC
16bit
Readout Noise
Typical 9 e-
System Gain

Binning
1x1,2x2,4x4
Exposure Time
1ms-10000sec
TEC
2 stage
Cooling
Typical -45 below Ambient
Shutter
Butterfly Mechanical Shutter with Uniform illumination
Moisture Control
Air Connector for removable silicon gel tube
Heat board for optic window of airproof CCD chamber
Built-in Filter Wheel
7 position, for 36mm unmounted filters
OAG interface
six M3 scew holes for QHYOAG
Telescope Interface
M54/0.75 inner screw
Power consumption
0% cooling 8W 50% cooling 16.5W 100% cooling 27W
Weight
1550g
QHY90A Electric Interface
USB Slave Port x1 USB host port x2 RS232 lemo 3pin port x2 2.1mm 12V DC port x2

Camera Type
Monochrome*~CCD/CMOS Camera
A leading manufacturer based in China, QHYCCD specializes in CCD and CMOS cameras for astronomy. Established to provide high-quality imaging solutions for astrophotographers, their products are well-regarded for their performance and reliability in capturing celestial objects.
Product added to wishlist