Connectivity

Filters

Mostrando 73-86 de 86 artículo(s)

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Canon EOS 550D, 600D, 650D, 700D 3A

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the PrimaLuceLab Eagle (also Eagle Core) in place of the battery.

Power Supplies

PrimaLuceLab 12V power cable with banana plugs for Eagle - 250cm

PLL_PL1000028

45,00 €

In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

PLL_PL1000042

39,00 €

This PrimaLuceLab Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power these devices like SkyWatcher EQ6,...

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Astro-Physics mounts with CP1/CP2/CP3...

PLL_PL1000033

88,00 €

The PrimaLuceLab Eagle control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Cables

Celestron AUX Port Splitter

CEL_93919

27,50 €

Create an extra auxiliary port on your Celestron computerized mount with this AUX Port Splitter Two auxiliary ports are required to use accessories like the Celestron StarSense AutoAlign on telescopes with only one built-in AUX port Adapter has two 6-pin auxiliary outputs and one 6-pin input

Power Supplies

PrimaLuceLab EAGLE type connector for 3A power OUT ports

PLL_PL1000036

15,00 €

PrimaLuceLab EAGLE type connector for 3A power OUT ports allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories.

Power Supplies

Celestron Car Battery Adapter (for all NexStars)

CEL_18769

25,00 €

Power your Celestron computerized telescope from your car battery or a portable 12V DC power supply. Barrel connector plugs into the 12V input jack on the telescope drive base. Power connector fits standard automobile cigarette lighter receptacles, also found on portable 12V battery packs like the Celestron PowerTank. 25-foot cord for lots of reach.

Remote Operation

Robtics EQDIR - EQMOD - ASIAIR - USB-RJ11 Cable for Sky-Watcher AZ-GTi, AZ-Go2, SynScan...

ROB_EQDIR_AZ

27,50 €

Cable for direct connection of a motorized azimuthal goto mount to a PC for PC control. The RJ11 side of the cable is connected to the mount via the hand controller port and thus this cable replaces the hand controller completely. USB connector connects to the PC, laptop or ASIAIR or similar devices. Cable uses the FTDI-chip and is compatible with Windows...

Power Supplies

PrimaLuceLab Eagle-compatible power cable for FLI camera - 115cm 8A

PLL_PL1000002

88,00 €

The PrimaLuceLab Eagle control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the8A plug with screw to prevent being disconnected accidentally...

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw -...

PLL_PL1000017

49,00 €

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A port

Remote Operation

Robtics EQDIR - EQMOD - ASIAIR - USB-RJ12 6P6C for Meade LX200 GPS PC connection and...

ROB_EQDIR_LX200

27,50 €

Cable for direct connection of a Meade LX200 mount to a PC for PC control. The RJ-12 6P6C side of the cable is connected to the mount/hand controller and the USB connector connects to the PC, laptop or ASIAIR or similar devices. 100% compatible replacement for the original Meade #507 cable. Control telescope from computer with astronomical software....

Power Supplies

Robtics Power Cable Switch 12v

ROB_12VSWITCH

10,00 €

Add a On/Off switch to a 12 volt power supply with the Robtics Power Cable Switch 12v. Input: Female 5.5mm x 2.1mm plug Output: Male 5.5mm x 2.1mm plug Cable length: 30cm For 12 volt DC power

Power Supplies

Robtics Power Cable Right Angle Connector/Converter 12v - 5.5mmx2.1mm and 5.5mmx2.5mm plug

ROB_RADCC2

10,00 €

Add a angle converter to a 12 volt power supply with the Robtics Power Cable Angle Converter 12v. This is a great to protect your cables and your expensive equipment. When physically stepping on a cable or a dangling cable is caught by the mount while tracking a tight pulled cable can snap of the power connector of the circuit board of your expensive...

Power Supplies

PrimaLuceLab 1.0m Eagle power cable extension cord 3A-8A

PLL_PL1000053

46,00 €

PrimaLuceLab 1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

Customer Service

Contact us

Robtics | Astronomical Instruments and Accessories

De Star 3H
2266NA Leidschendam

+31 (0) 70 - 369 79 10

info@robtics.nl

Cookies funcionales

Descripción y cookies

Las cookies funcionales son estrictamente necesarias para proporcionar los servicios de la tienda, así como para su correcto funcionamiento, por ello no es posible rechazar su uso. Permiten al usuario la navegación a través de nuestra web y la utilización de las diferentes opciones o servicios que existen en ella.


PHP_SESSID	www.robtics.nl	La cookie PHPSESSID es nativa de PHP y permite a los sitios web almacenar datos de estado serializados. En el sitio web se utiliza para establecer una sesión de usuario y para pasar los datos de estado a través de una cookie temporal, que se conoce comúnmente como una cookie de sesión. Estas Cookies solo permanecerán en su equipo hasta que cierre el navegador.	Sesión
PrestaShop-#	.www.robtics.nl	Se trata de una cookie que usa Prestashop para guardar información y mantener abierta la sesión del usuario. Permite guardar información como la divisa, el idioma, identificador del cliente, entre otros datos necesarios para el correcto funcionamiento de la tienda.	480 horas

Cookies publicitarias

Descripción

Son aquellas que recaban información sobre los anuncios mostrados a los usuarios del sitio web. Pueden ser de anónimas, si solo recopilan información sobre los espacios publicitarios mostrados sin identificar al usuario o, personalizadas, si recopilan información personal del usuario de la tienda por parte de un tercero, para la personalización de dichos espacios publicitarios.

Cookies de analíticas

Descripción

Recopilan información sobre la experiencia de navegación del usuario en la tienda, normalmente de forma anónima, aunque en ocasiones también permiten identificar de manera única e inequívoca al usuario con el fin de obtener informes sobre los intereses de los usuarios en los productos o servicios que ofrece la tienda.

Cookies de rendimiento

Descripción

Se usan para mejorar la experiencia de navegación y optimizar el funcionamiento de la tienda.

Otras cookies

Descripción

Son cookies sin un propósito claro o aquellas que todavía estamos en proceso de clasificar.

Product added to wishlist

Product added to compare.