Wyczyść Zrobione

×

Robtics PrimaLuceLab 2" Visual back for ESATTO 2"

Robtics PrimaLuceLab 2" Visual back for ESATTO 2"

PrimaLuceLab 2" Visual back for ESATTO 2"

Indeks PLL_PL8410001

84,00 €

Brutto

If you want to use your telescope visually with PrimaLuceLab ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories.

Czy masz pytanie dotyczące tego produktu?

Zapytaj o to!

Optical length of the 2" visual back for PrimaLuceLab ESATTO 2" is 12,5mm.

Adapter Type: Visual Back
Adapter Size: 2 inch (50,8mm)

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

Klienci którzy zakupili ten produkt kupili również:

PrimaLuceLab M48 female to T2 male Adapter

Adapters

PrimaLuceLab M48 female to T2 male Adapter

M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...

PrimaLuceLab Adapter ESATTO 2" for telescopes with SC thread

Adapters

PrimaLuceLab Adapter ESATTO 2" for telescopes with SC thread

Thanks to its low profile, the PrimaLuceLab ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8" and 9.25" Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift...

PrimaLuceLab Adapter ESATTO 2" for telescopes with large...

Adapters

PrimaLuceLab Adapter ESATTO 2" for telescopes with large 3.3" SC thread

SC 3.3" adapter for PrimaLuceLab ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3" adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD...

PrimaLuceLab Adapter from M56 to T2 with stop Ring for...

Adapters

PrimaLuceLab Adapter from M56 to T2 with stop Ring for ESATTO 2"

Adapter from M56 to T2 with stop ring for PrimaLuceLab ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the T2 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

Product added to wishlist