Reset Fertig

×

Artikel der Marke PrimaLuceLab

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

1 - 24 von 287 Artikel(n)

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 0.5m Eagle power cable extension cord

0,5m PrimaLuceLab Eagle power cable extension cord is used when you need a longer cable to power devices through the PrimaLuceLab EAGLE.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 1.0m Eagle power cable extension cord 3A-8A

PrimaLuceLab 1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 100mm PLUS support Rings

PLL_PLLANSU100P

The PrimaLuceLab 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 105mm PLUS support Rings

PLL_PLLANSU105P

The PrimaLuceLab 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS...

Robtics PrimaLuceLab

Neu

Adapters

PrimaLuceLab 10mm M68 extension

PrimaLuceLab 10mm M68 extension

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 115mm PLUS support Rings

PLL_PLLANSU115P

The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...

Robtics PrimaLuceLab

Neu

Power Supplies

PrimaLuceLab 12.8V AC adapter for EAGLE - 14A

If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12,8V 14A power supply (compatible with 100 to 240V) comes a 2,5 meters extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 122mm PLUS support Rings

PLL_PLLANSU134P

The PrimaLuceLab 134mm PLUS support rings are designed telescopes with tube approximately 134mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands. Like all the other elements of the PLUS series,...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 125mm PLUS support Rings

PLL_PLLANSU125P

The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V AC Adapter for EAGLE - 5A

If you want to power PrimaLuceLab EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12V power supply comes with a screw connector for EAGLE on one side and a plug for the socket on the other (compatible with 100 to 240V). The AC adapter for...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V power cable with banana plugs for Eagle - 250cm

In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 131mm PLUS support Rings

PLL_PLLANSU131P

The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED. Like...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 142mm PLUS support Rings

PLL_PLLANSU140P

The PrimaLuceLab 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 145mm PLUS support Rings

PLL_PLLANSU145P

The PrimaLuceLab 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 150mm PLUS support Rings

PLL_PLLANSU150P

PrimaLuceLab 150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Zubehör

PrimaLuceLab 155mm PLUS support Rings

PLL_PLLANSU155P

PrimaLuceLab 155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 168mm PLUS support Rings

PLL_PLLANSU168P

The PrimaLuceLab 168mm PLUS support rings are designed for telescopes with tube approximately 168mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 180mm PLUS support Rings

PLL_PLLANSU180P

The PrimaLuceLab 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" nosepiece for ARCO 2"

2" nosepiece for PrimaLuceLab ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" Visual back for ESATTO 2"

If you want to use your telescope visually with PrimaLuceLab ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for...

Robtics PrimaLuceLab

Neu

Adapters

PrimaLuceLab 2" visual back for ESATTO 2" LP

PrimaLuceLab 2" visual back for ESATTO 2" LP

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" Visual back for ESATTO 3"

If you want to use your telescope visually with PrimaLuceLab ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation)...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 235mm PLUS support Rings

PLL_PLLANSU235P

PrimaLuceLab 235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

1
2
3
…
12

Product added to wishlist