Réinitialiser Valider

×

Robtics PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

Robtics PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

Référence PLL_SESTOSENSO-TEMP

25,00 €

TTC

This temperature sensor is compatible both with PrimaLuceLab ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO, the robotic focusing motor for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with SESTO SENSO it's used in order to compensate focusing for changes in temperature.

Avez-vous une question à propos de se produit?

Demander à ce sujet!

This temperature sensor is compatible both with PrimaLuceLab ECCO, the environmental computerized controller for PrimaLuceLab EAGLE, and with PrimaLuceLab SESTO SENSO, the robotic focusing motor for telescopes. When used with PrimaLuceLab ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the PrimaLuceLab EAGLE. When used with PrimaLuceLab SESTO SENSO it's used in order to compensate focusing for changes in temperature.

Focuser Type: Focuser Accessories

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

Les clients qui ont acheté ce produit ont également acheté...

PrimaLuceLab SESTO SENSO 2 33mm Adapter

Adapters

PrimaLuceLab SESTO SENSO 2 33mm Adapter

PLL_SESTOSENSO-AD33II

This 33mm adapter allows you to install PrimaLuceLab SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it...

PrimaLuceLab Vixen plate 240mm PLUS

PrimaLuceLab Vixen plate 240mm PLUS 2

Mounting Hardware

PrimaLuceLab Vixen plate 240mm PLUS

The PrimaLuceLab Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...

Robtics Vixen maat klem inrichting

Mounting Hardware

Robtics Vixen maat klem inrichting

PrimaLuceLab Dew Heater Element for 180mm diameter...

Dauwbescherming

PrimaLuceLab Dew Heater Element for 180mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can...

PrimaLuceLab ECCO, environmental computerized controller...

Remote Operation

PrimaLuceLab ECCO, environmental computerized controller for EAGLE

PrimaLuceLab ECCO is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity of the air around your telescope and the temperature of your lenses by calculating the...

PrimaLuceLab Losmandy plate 350mm PLUS

PrimaLuceLab Losmandy plate 350mm PLUS 2

Mounting Hardware

PrimaLuceLab Losmandy plate 350mm PLUS

The PrimaLuceLab Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or...

PrimaLuceLab Dew Heater Element for 50mm diameter telescopes

Dauwbescherming

PrimaLuceLab Dew Heater Element for 50mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can...

PrimaLuceLab SESTO SENSO 2 robotic focusing motor

Focusers

PrimaLuceLab SESTO SENSO 2 robotic focusing motor

PLL_SESTOSENSOII

PrimaLuceLab SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don't want to focus using a computer, you can connect wirelessly...

Product added to wishlist