Reset Done

×

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO - 1

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO - 1

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

Reference PLL_SESTOSENSO-TEMP

€25.00

Tax included

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with SESTO SENSO or ESATTO it's used in order to compensate focusing for changes in temperature (by using focusing softwares not provided with this sensor).

Do you have a question about this product?

Ask about it!

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with SESTO SENSO or ESATTO it's used in order to compensate focusing for changes in temperature (by using focusing softwares not provided with this sensor).

Focuser Type: Focuser Accessories

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

Customers who bought this product also bought:

PrimaLuceLab SESTO SENSO 2 robotic focusing motor - 1

Focusers

PrimaLuceLab SESTO SENSO 2 robotic focusing motor

PLL_SESTOSENSOII

SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don't want to focus using a computer, you can connect wirelessly from any...

PrimaLuceLab Losmandy style dovetail plate 350mm PLUS - 1

PrimaLuceLab Losmandy style dovetail plate 350mm PLUS - 1 2

Mounting Hardware

PrimaLuceLab Losmandy style dovetail plate 350mm PLUS

The Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the...

PrimaLuceLab SESTO SENSO 2 33mm adapter - 1

Adapters

PrimaLuceLab SESTO SENSO 2 33mm adapter

PLL_SESTOSENSO-AD33II

PrimaLuceLab SESTO SENSO 2 33mm adapter

Robtics Vixen maat klem inrichting - 1

Mounting Hardware

Robtics Vixen maat klem inrichting

PrimaLuceLab ECCO, environmental computerized controller for EAGLE - 1

Remote Operation

PrimaLuceLab ECCO, environmental computerized controller for EAGLE

PrimaLuceLab ECCO is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity of the air around your telescope and the temperature of your lenses by calculating the...

PrimaLuceLab Dew heater for 180mm diameter telescopes - 1

Dew prevention

PrimaLuceLab Dew heater for 180mm diameter telescopes

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.

PrimaLuceLab Vixen style dovetail plate 240mm PLUS - 1

PrimaLuceLab Vixen style dovetail plate 240mm PLUS - 1 2

Mounting Hardware

PrimaLuceLab Vixen style dovetail plate 240mm PLUS

The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...

PrimaLuceLab Dew heater for 50mm diameter telescopes - 1

Dew prevention

PrimaLuceLab Dew heater for 50mm diameter telescopes

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.

Product added to wishlist