Carrello
Non ci sono più articoli nel tuo carrello
QHY Offaxis guider Small
QHY Oguider small
245,00 €
Tasse incluse
Avete una domanda su questo prodotto?
QHY OAG - Thin and Flexible Setup
QHYOAG is has the thin and solid design. The OAG main body is just 10mm thickness.(But you may need a M42 thread or M54 connector board with 3mm thickness, in this condition it is 13mm totally). There is six 3mm through hole in the OAG. It can connect with the QHYCFW2, QHY "A" series camera directly. If you have no QHYCFW2 and QHY "A" series camera, you can also use this OAG directly with some adapters.
QYOAG has three models. QHYOAG-S,QHYOAG-M,QHYOAG-L, in order to match the different CCD sensor size.
QHYOAG comes with a multi-thread 1.25inch focuser. The focuser has a screw locker to get the guide camera solid fixed after focusing.
The prism position can be adjusted and it has a locker to fix the position. The prism is 8mm*8mm size and the optic hole from prism to mirror is 8mm diameter.
Specification:
Prism | 8mm*8mm Multi-Coating Prism |
Through Hole Size | 8mm diameter |
Focuser | 1.25inch Multi-thread Focuser with 6mm range |
Focuser Locker | Yes |
Guide Camera Position Adjust | Yes |
Directly Install Method | Six M3 screw to QHYCFW2 or QHY "A" series camera |
Telescope Interface | M42/M54/M60 0.75 connect board (3mm thickness) |
Use for other camera | Yes, with secondary M42/M54/M60 connect board in another side |
Thickness | 10mm(without telescope connect board) 13mm(with telescope connect board) |
- Autoguiding Type
- Off-Axis Guiding
A leading manufacturer based in China, QHYCCD specializes in CCD and CMOS cameras for astronomy. Established to provide high-quality imaging solutions for astrophotographers, their products are well-regarded for their performance and reliability in capturing celestial objects.
Tap to zoom
