Bob's Knobs - Celestron 9.25 inch (23.5 cm) F/10 SCT standard - Collimation Tool

Bob's Knobs voor Celestron 9.25 inch (23,5 cm) F/10 SCT met zwarte of zilveren inbus, zilveren Phillips of koploze 6-32 inch collimatieschroeven. Past NIET op CPC 925.

Specification:

Bob's Knobs - Celestron 9.25 inch (23,5 cm) F/10 SCT standaard:

• Set van drie Bob's Knobs collimatieschroeven;
• Knoppen: zwart plastic, 16 mm (5/8 inch) diameter;
• Schroefdraad: zwart geanodiseerd aluminium legering.
  

Extra info:

The factory dust cover will fit normally with Bob's Knobs installed.

Knobs include a set of long spacers so they clear the secondary housing lip.

Celestron 9.25 inch SCTs manufactured prior to 2006 have standard 6-32 collimation screws and require knobs with standard threads. These telescopes can be identified by 1) no writing inside the secondary housing (except for the serial number); and 2) most have silver factory collimation screws. Do not use metric knobs on these telescopes.

A few non-CPC 9.25 inch scopes manufactured in 2006 have black Phillips factory collimation screws that aren't metric. These requires knobs with standard threads.

The CPC 925 SCT requires knobs with metric threads. The CPC 925 secondary can be identified by 1) a factory-installed plastic cover over the collimation screws; 2) black Phillips factory collimation screws; and 3) brand information on the inside of the housing. Do not use these knobs on the CPC 925.