Astronomik ProPlanet 807 Filter XT Clip-Filter EOS APS-C

Do you own a Canon EOS digital camera for astro-imaging? Then you have surely encountered the following problems:

• Large filters for large camera lens objectives are very expensive
• If you place a filter holder between your camera body and lens you loose the ability to focus to infinity
• For very fast (low f/ number) telescopes like the Vixen R200SS or the Takahashi Epsilon astrograph, a filter drawer or a filter wheel cannot be used since the distance to the corrector lenses would be changed.
• With long exposure times your cameras sensor chip is exposed to more dust

With the Astronomik Clip-Filter System you can take care of all of these problems at once!

The patented Astronomik Clip-Filter System is black anodized aluminum and laser-cut on state-of-the-art modern machines. It can be inserted within seconds directly into the EOS camera body. There are no changes necessary and all lens functions (focus, screen, image stabilization) remain functional!

Almost all Canon system lenses (with the exception of the EF-S series) and all M42 and T2 lens adapters, can be used with the Astronomik Clip-Filter System. The Clip-Filter System also acts as an outstanding dust shield, which prevents the possibility of dust settling on the sensor during long time exposure (The MC-Clear filter does not have a filter effect and only acts as a dust shield.)

List of compatible Canon EOS cameras:

Important: Not suitable are cameras offered before 2003 and all varieties of the Canon EOS 1D and EOS M.

The new Astronomik XT filters are designed to give you widefield-images with beautiful crisp and sharp stars right to the edge of the field.

Our Astronomik Clip filters are a popular and very well known tool among astrophotographers in the whole world. Sadly image quality was limited when using them with very short focal lengths to take widefield images: Even if the normal Astronomik filters are made of 1mm thick glas only, some wideangle lenses showed aberrations in the edge of the field of view when used with Clip-filters.

The new Astronomik XT filters are coated on an ultra-thin substrate with a thickness of 0.3mm only! Due to that the residual aberations are minimized and stars are crisp and sharp right into the corner of the image.

This extremely thin substrate is polished to the highest standards, free of internal strain and stress and suitable even for the most advanced imaging applications.

The XT filters are produced in the same way as the normal Astronomik filters: 100% scratch resistant, not sensitive to moisture or high humidity and no-ageing. Due to this the XT filters will have the same performance today and in many years in the future. To emphazise this you get a 10 year warranty on our filters!

Please note: Not all Astronomik filters are available as XT filters: Due to the huge amount of work to produce these ultra-thin filters, we are currently doing only a selection of filters, which are mostly used for widefield imaging. If you require a XT filter not listed below, please drop us a line.

Ideal addition to the Astronomik ProPlanet IR 742 for imaging the moon and planets, with telescopes larger then 10" (250mm) when the seeing is poor.

This filter is an ideal complement to the ProPlanet IR 742 for use with converted DSLR cameras, CCD cameras and Webcams. The effects of seeing are distinctly reduced. It is your entry into previously unknown dimensions of photography of the moon and the planets.

The ProPlanet IR 807 only allows infrared light with wavelengths of more than 807 nm to pass. In this wavelength range the effects of seeing are significantly lower than in the visible spectrum of the human eye. This allows much sharper images than are usually obtained from your device and location. Another advantage is that the sky background of advanced dawn is dark and even allows photography of planets and moon at daylight.

Main use

The Astronomik ProPlanet IR 807 cuts off the visible part of the spectrum and allows the light of wavelengths longer then 807nm to pass. Due to this behavior the part of the spectrum that is most sensitive to bad seeing is rejected. This approach does a big improvement to the imaging of planets and the moon. The image is more steady than the image in the visible light.

Other uses

• The Astronomik ProPlanet IR 807 is designed to be an addition to the Astronomik ProPlanet IR 742, if the seeing is extremely bad and a larger telescope is used.
• For most cameras the exposure times doubles, compared to the Astronomik ProPlanet IR 742 or imaging in visible light, if the Astronomik ProPlanet IR 807 is used.
• Darkens the background during twilight.
• Imaging of bright planets, stars and comets by day.
• Imaging of young stars in dust clouds and stellar nurseries.

Alternatives

If the seeing is not so bad or if the telescope is smaller than 10" (250mm) we recommend the use of the Astronomik ProPlanet IR 742.

Suitability

• Visual observation (dark skies): Unsuitable, the eye is insensitive at this spectrum
• Visual observation (urban skies): Unsuitable, the eye is insensitive at this spectrum
• Film photography: Unsuitable
• CCD photography: Reasonable, for special IR photography (as chlorophyll)
• DSLR photography (original): Unsuitable
• DSLR photography (astro modified): Unsuitable
• DSLR photography (MC modified): Good, for IR daylight photography, longer exposure time
• Webcam / Video (Planets): Very good, rejects problems with seeing, particularly with telescopes larger 250 mm aperture
• Webcam / Video (Deep Sky): Very good, rejects problems with seeing, particularly with telescopes larger 250 mm aperture

Technical Data

• more then 97% transmission for wavelengths of 807nm to 1100nm
• blocking of wavelengths between 350nm and 790nm
• Parfocal with other Astronomik filters
• Glass thickness: 1mm
• Completely resistant against high humidity, scratches and aging effects
• Diffraction limited, the filter will not reduce the optical performance of your telescope!
• Astronomik filters are delivered in a high-quality, long lasting, filter box
• Since 2008 we do ship filters with a completely new design. Any kind of halo or strange reflection is a matter of past