Reset Done

×

PrimaLuceLab Dew heater for 180mm diameter telescopes - 1

PrimaLuceLab Dew heater for 180mm diameter telescopes - 1

PrimaLuceLab Dew heater for 180mm diameter telescopes

Reference PLL_PLLFAS180

€74.00

Tax included

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.

Do you have a question about this product?

Ask about it!

This dew heater is designed to be powered and controlled directly from the EAGLE but it can also be connected to any 12V external power source with RCA connector. Power consumption is 1170mA.

Dew heater for 180mm diameter telescopes

Example of dew heater connected to one of the EAGLE power ports.

Dew Prevention Type: Dew Heaters

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

Customers who bought this product also bought:

PrimaLuceLab Dew heater for 50mm diameter telescopes - 1

Dew prevention

PrimaLuceLab Dew heater for 50mm diameter telescopes

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.

PrimaLuceLab ECCO, environmental computerized controller for EAGLE - 1

Remote Operation

PrimaLuceLab ECCO, environmental computerized controller for EAGLE

PrimaLuceLab ECCO is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity of the air around your telescope and the temperature of your lenses by calculating the...

PrimaLuceLab 12,8V AC adapter for EAGLE - 14A - 1

New

Power Supplies

PrimaLuceLab 12.8V AC adapter for EAGLE - 14A

If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12,8V 14A power supply (compatible with 100 to 240V) comes a 2,5 meters extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power...

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO - 1

Focusers

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

PLL_SESTOSENSO-TEMP

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...

Product added to wishlist