Wyczyść Zrobione

×

Lista produktów marki PrimaLuceLab

Founded in Italy, PrimaLuceLab specializes in advanced telescope hardware mountings and imaging equipment. Their focus on integrating technology and usability sets them apart, providing astronomers with high-performance solutions in a compact design.

Pokazano 1-287 z 287 pozycji

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 0.5m Eagle power cable extension cord

0,5m PrimaLuceLab Eagle power cable extension cord is used when you need a longer cable to power devices through the PrimaLuceLab EAGLE.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 1.0m Eagle power cable extension cord 3A-8A

PrimaLuceLab 1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 100mm PLUS support Rings

PLL_PLLANSU100P

The PrimaLuceLab 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 105mm PLUS support Rings

PLL_PLLANSU105P

The PrimaLuceLab 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 10mm M68 extension

PrimaLuceLab 10mm M68 extension

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 115mm PLUS support Rings

PLL_PLLANSU115P

The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab 12.8V AC adapter for EAGLE - 14A

If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12,8V 14A power supply (compatible with 100 to 240V) comes a 2,5 meters extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 122mm PLUS support Rings

PLL_PLLANSU134P

The PrimaLuceLab 134mm PLUS support rings are designed telescopes with tube approximately 134mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands. Like all the other elements of the PLUS series,...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 125mm PLUS support Rings

PLL_PLLANSU125P

The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V AC Adapter for EAGLE - 5A

If you want to power PrimaLuceLab EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12V power supply comes with a screw connector for EAGLE on one side and a plug for the socket on the other (compatible with 100 to 240V). The AC adapter for...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V power cable with banana plugs for Eagle - 250cm

In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

PrimaLuceLab 12V power cable with cigarette plug for Eagle - 250cm

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 131mm PLUS support Rings

PLL_PLLANSU131P

The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED. Like...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 142mm PLUS support Rings

PLL_PLLANSU140P

The PrimaLuceLab 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 145mm PLUS support Rings

PLL_PLLANSU145P

The PrimaLuceLab 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 150mm PLUS support Rings

PLL_PLLANSU150P

PrimaLuceLab 150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Akcesoria

PrimaLuceLab 155mm PLUS support Rings

PLL_PLLANSU155P

PrimaLuceLab 155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 168mm PLUS support Rings

PLL_PLLANSU168P

The PrimaLuceLab 168mm PLUS support rings are designed for telescopes with tube approximately 168mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 180mm PLUS support Rings

PLL_PLLANSU180P

The PrimaLuceLab 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" nosepiece for ARCO 2"

2" nosepiece for PrimaLuceLab ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" Visual back for ESATTO 2"

If you want to use your telescope visually with PrimaLuceLab ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 2" visual back for ESATTO 2" LP

PrimaLuceLab 2" visual back for ESATTO 2" LP

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 2" Visual back for ESATTO 3"

If you want to use your telescope visually with PrimaLuceLab ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation)...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 235mm PLUS support Rings

PLL_PLLANSU235P

PrimaLuceLab 235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab 244mm PLUS support rings

PLL_PLLANSU244P

244mm PLUS support rings can be used with any brands telescopes (for example Takahashi Mewlon 210mm) with tube 244mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 3" nosepiece for ARCO 3"

PrimaLuceLab 3" nosepiece for ARCO 3"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 3" visual back for ESATTO 3.5" LP

PrimaLuceLab 3" visual back for ESATTO 3,5" LP

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 3" visual back for ESATTO 3" and ARCO 3"

PrimaLuceLab 3" visual back for ESATTO 3" and ARCO 3"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 40mm extension tube for ESATTO 3"

PrimaLuceLab 40mm extension tube for ESATTO 3"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 5mm M48 extension

PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 5mm T2 extension

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Autoguiding

PrimaLuceLab 60mm CompactGuide scope with PLUS 80mm guide Rings

PrimaLuceLab 60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 65mm extension tube for ESATTO 3"

When installing PrimaLuceLab ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 7mm M48 extension

PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 7mm T2 extension

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab 80mm PLUS support Rings

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 80mm PLUS support Rings

The PrimaLuceLab 80mm PLUS support rings can be used with various brands telescopes (for example refractors 60-70mm in diameter) with 80mm diameter tube. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 85mm PLUS support Rings

PrimaLuceLab 85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. Like...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 90mm PLUS support Rings

The PrimaLuceLab 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab 95mm PLUS support Rings

The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL. Like all the other...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab 9mm M48 extension

PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab 9mm T2 extension

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab Adapter EQ6 / AZ-EQ6 / CGEM for C82 pier for concrete base

PLL_C82-C-EQ6-FL

This adapter allows you to connect EQ6 / AZ-EQ6 / CGEM mounts to the C82 pier for concrete base.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for ARCO 2"

Adapter PrimaLuceLab ESATTO 2" for PrimaLuceLab ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser ESATTO 2" and control it through the special port on ESATTO 2". By adding this adapter to ARCO 2", thickness of rotator is 21mm.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for GSO/Orion/TPO Ritchey-Chretien 6 and 8 inches

If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect PrimaLuceLab ESATTO 2" to this telescope. You can use the standard extensions that come with the RC telescope in order to install the focuser...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for SkyWatcher/Orion ED80, ED100 and ED120

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect PrimaLuceLab ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect PrimaLuceLab ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect PrimaLuceLab ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 2" for Takahashi FS-60Q

PrimaLuceLab Adapter ESATTO 2" for Takahashi FS-60Q

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for Takahashi telescopes with M72 thread

Thanks to its low profile, the PrimaLuceLab ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus. By adding the M71/M72 adapter, you can connect it also to the...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for telescopes with large 3.3" SC thread

SC 3.3" adapter for PrimaLuceLab ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3" adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 2" for telescopes with SC thread

Thanks to its low profile, the PrimaLuceLab ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8" and 9.25" Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 2" LP for ARCO 2"

PrimaLuceLab Adapter ESATTO 2" LP for ARCO 2"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 2" LP for telescopes with large 3.3" SC thread

PrimaLuceLab Adapter ESATTO 2" LP for telescopes with large 3.3" SC thread

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 2" LP for telescopes with SC thread

PrimaLuceLab Adapter ESATTO 2" LP for telescopes with SC thread

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for ARCO 3"

Adapter ESATTO 3,5" LP for ARCO 3" allows you to connect the rotator to ESATTO 3,5" LP low profile focuser and control it through the special port on ESATTO. By adding this adapter (that has an optical thickness of 3mm) to ARCO 3", thickness of rotator becomes 26mm.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and...

PrimaLuceLab Adapter ESATTO 3.5" LP for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH200

PrimaLuceLab Adapter ESATTO 3,5" LP for OfficinaStellare Veloce RH200

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH300

PrimaLuceLab Adapter ESATTO 3,5" LP for OfficinaStellare Veloce RH300

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for PlaneWave DeltaRho 350

PrimaLuceLab Adapter ESATTO 3,5" LP for PlaneWave DeltaRho 350

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for telescopes with large 3.3" SC thread

PrimaLuceLab Adapter ESATTO 3,5" LP for telescopes with large 3.3" SC thread

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3.5" LP for telescopes with SC thread

PrimaLuceLab Adapter ESATTO 3,5" LP for telescopes with SC thread

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3" for ARCO 2"

Adapter ESATTO 3" for ARCO 2" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3" for ARCO 3"

Adapter ESATTO 3" for ARCO 3" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 3" for Borg 90FL and 107FL f3.9

If you are searching for the most precise motorized focuser for Borg 90FL and 107FL f3.9, this adapter allows you to connect PrimaLuceLab ESATTO 3" to these telescopes. Remove the original focuser of the Borg 90FL and 107FL f3.9 and install ESATTO 3". In order to reach the focus you can use the same photo adapters that you use with the standard focuser.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 3" for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and cabron tubes) for astrophotography, this adapter allows you to connect PrimaLuceLab ESATTO 3" to the M117 thread of these telescope. You can use the standard extensions that come with the RC telescope in order...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3" for Meade 16 inches with 4" thread

PrimaLuceLab Adapter ESATTO 3" for Meade 16 inches with 4" thread

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED

PrimaLuceLab Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED

Adapter PrimaLuceLab ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 3" for Takahashi FSQ85

If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect PrimaLuceLab ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 3" for Takahashi telescopes with M72 thread

Thanks to its low profile, the PrimaLuceLab ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 3" for Takahashi TSA 120

PrimaLuceLab Adapter ESATTO 3" for Takahashi TSA 120

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for ARCO 2"

Adapter ESATTO 4" for ARCO 2" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for ARCO 3"

Adapter ESATTO 4" for ARCO 3" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for ARCO 3", only for FSQ106

PrimaLuceLab Adapter ESATTO 4" for ARCO 3", only for FSQ106

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst

PrimaLuceLab Adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter ESATTO 4" for Takahashi FSQ-106

Adapter PrimaLuceLab ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the original focuser in order to allow you to reach focus with the telescope.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4

PrimaLuceLab Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter ESATTO 4" for Takahashi TOA130

PrimaLuceLab Adapter ESATTO 4" for Takahashi TOA130

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab Adapter for EQ5 / HEQ5 / AZ-EQ5 for C82 pier for concrete base

PLL_C82-C-EQ5-FL

This adapter allows you to connect EQ5 / HEQ5 / AZ-EQ5 mounts to the C82 pier for concrete base.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M110 to M68 with stop ring for ESATTO 4"

PrimaLuceLab Adapter from M110 to M68 with stop ring for ESATTO 4"

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M110 to M92 female for ESATTO 4"

Adapter from M110 to M92 female for PrimaLuceLab ESATTO 4" converts M110x1 thread of the ESATTO 4" draw tube into a M92x1 female thread that is the same of the Takahashi original focuser. This way you can connect to ESATTO 4" the Takahashi photographic adapters.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M110 to M95 female for ESATTO 4"

PrimaLuceLab Adapter from M110 to M95 female for ESATTO 4"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M110 to M98 with stop ring for ESATTO 4"

PrimaLuceLab Adapter from M110 to M98 with stop ring for ESATTO 4"

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M56 to M48 with stop Ring for ESATTO 2"

M48x0.75 adapter for PrimaLuceLab ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M56 to M54 with stop Ring for ESATTO 2"

Adapter from M56 to M54 with stop ring for PrimaLuceLab ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M56 to M57 with stop Ring for ESATTO 2"

Adapter from M56 to M57 with stop ring for PrimaLuceLab ESATTO 2" allows you to connect any camera or accessory with M57x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" focuser draw tube. Thanks to the M57 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M56 to SC with stop Ring for ESATTO 2"

The SC thread adapter for PrimaLuceLab ESATTO 2" allows you to connect any accessory with SC female thread, like the SC focal reducers to ESATTO. Just thread this adapter to the M56 thread in the ESATTO 2" focuser draw tube. Thanks to the SC stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M56 to T2 with stop Ring for ESATTO 2"

Adapter from M56 to T2 with stop ring for PrimaLuceLab ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the T2 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M60 to M48 with stop ring for ESATTO 2" LP

PrimaLuceLab Adapter from M60 to M48 with stop ring for ESATTO 2" LP

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M60 to M54 with stop ring for ESATTO 2" LP

PrimaLuceLab Adapter from M60 to M54 with stop ring for ESATTO 2" LP

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M60 to T2 with stop ring for ESATTO 2" LP

PrimaLuceLab Adapter from M60 to T2 with stop ring for ESATTO 2" LP

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M48 with stop Ring for ESATTO 3"

Adapter from M81 to M48 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M48 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M54 with stop Ring for ESATTO 3"

Adapter from M81 to M54 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M57 with stop Ring for ESATTO 3"

Adapter from M81 to M57 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M57 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M57 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3"

PrimaLuceLab Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M81 to M68 female for ESATTO 3" and ARCO 3"

PrimaLuceLab Adapter from M81 to M68 female for ESATTO 3" and ARCO 3"

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M68 with stop Ring for ESATTO 3"

Adapter from M81 to M68 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M68 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M72 female for ESATTO 3"

Adapter from M81 to M72 female for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to M72 with stop Ring for ESATTO 3"

Adapter from M81 to M72 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with M72 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M72 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab Adapter from M81 to T2 with stop Ring for ESATTO 3"

Adapter from M81 to T2 with stop ring for PrimaLuceLab ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the T2 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M98 to M68 with stop ring for ESATTO 3.5" LP

PrimaLuceLab Adapter from M98 to M68 with stop ring for ESATTO 3,5" LP

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Adapter from M98 to M72 female for ESATTO 3.5" LP

PrimaLuceLab Adapter from M98 to M72 female for ESATTO 3,5" LP

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab ALTO-1 telescope cover motor for GIOTTO up to 220mm

PrimaLuceLab ALTO-1 telescope cover motor for GIOTTO up to 220mm

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab ALTO-3 telescope cover motor for GIOTTO larger than 320mm

PrimaLuceLab ALTO-3 telescope cover motor for GIOTTO larger than 320mm

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab ALTO-3L adapter for OS RiDK 400

PrimaLuceLab ALTO-3L adapter for OS RiDK 400

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab ALTO-3L telescope cover motor for GIOTTO 560mm

PrimaLuceLab ALTO-3L telescope cover motor for GIOTTO 560mm

Robtics PrimaLuceLab

Rotators

PrimaLuceLab ARCO 2" robotic rotator

ARCO 2" is the new low profile ARC second resolution rotator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2" version of ARCO has a thickness of only 20mm and a free aperture of 50.8mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...

Robtics PrimaLuceLab

Rotators

PrimaLuceLab ARCO 3" robotic rotator

ARCO 3" is the larger version of our ARC second resolution rotator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 3" version of ARCO has a thickness of only 23mm and a free aperture of 76.2mm. When used together with an equatorially mounted telescope, ARCO allows you to...

Robtics PrimaLuceLab

Nowy

Cables

PrimaLuceLab ARCO rotator port cable - 220mm long

PrimaLuceLab ARCO rotator port cable - 220mm long

Robtics PrimaLuceLab

Nowy

Rotators

PrimaLuceLab ARCO rotator port cable - 690mm long

PrimaLuceLab ARCO rotator port cable - 690mm long

Robtics PrimaLuceLab

Nowy

Observatories

PrimaLuceLab ASTRO-RES Observatory station with 3m dome

PLL_PLLASTRORES1

ASTRO-RES Observatory station is the complete astronomical observatory designed for astronomy research and education: thanks to our long experience with optical telescopes, we can support astronomy institutes all around the world. ASTRO-RES Observatory Station is remotely controlled and powered thanks to the EAGLE, and it comes with ESATTO focuser, ARCO...

Robtics PrimaLuceLab

Nowy

Autoguiding

PrimaLuceLab Autoguider package with 60mm guide scope, PLUS rings and QHY5L-II mono camera

PLL_PLLKITAUTOG_

Autoguide package composed by PLUS 80mm guide rings, 60mm CompactGuide scope and QHY5L-II mono guide camera. This package is the perfect solution for those searching for everything needed to start autoguiding telescope during long astrophotography exposures. It includes everything you need for the guide and it's perfect for installation in parallel to...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab AZ-EQ5 PLUS Adapter plate

PrimaLuceLab AZ-EQ5 PLUS adapter plate

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Big Dovetail Clamp Vixen+Losmandy PLUS

The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5

PLL_PLLMORVLPB-AZEQ5_

The PrimaLuceLab big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the AZ-EQ5 type mount. Thus you will have a better connection than the original AZ-EQ5 offering greater...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

PLL_PLLMORVLPB-EQ6_

The PrimaLuceLab big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount. Thus you will have a better connection than the original EQ6 or N-EQ6 offering...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

PLL_PLLMORVLPB-HEQ5_

The PrimaLuceLab big dovetail clamp Vixen+Losmandy PLUS for HEQ5 allows you to install, on the Skywatcher HEQ5 mount, telescopes with Vixen and Losmandy dovetail bars. The HEQ5 mount can connect only Vixen type dovetail plates: with our big dovetail clamp Vixen+Losmandy PLUS for HEQ5 you can also connect the Losmandy type dovetail plates!

Robtics PrimaLuceLab

Nowy

Observatories

PrimaLuceLab BINO-SSA Observatory Station with large FoV and 3m dome

PLL_PLLBINOSSA1

BINO-SSA is a turn-key and affordable Observatory Station with dual optical telescope that provide a large field of view for Space Situational Awareness (SSA) and Space Surveillance and Tracking (SST) activities like the study of space debris and its classification. In fact a modern use of optical telescopes is to create a network of optical systems with...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Black color bushing for SESTO SENSO 2

PrimaLuceLab Black color bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Black color bushing long for SESTO SENSO 2 adapters

PrimaLuceLab Black color bushing long for SESTO SENSO 2 adapters

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab Blank adapter for C120 pier

PrimaLuceLab Blank adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Blue color bushing for SESTO SENSO 2

PrimaLuceLab Blue color bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Nowy

Books, atlases, software

PrimaLuceLab Book - Radio astronomy: Introduction to invisible sky

PLL_RADIOBOOK-EN

PrimaLuceLab Book - Radio astronomy: Introduction to invisible sky

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab C120 pier for concrete base

C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high stability and needs for less space. A pier also prevent the telescope to touch the tripod legs during movements! This pier is available also with different...

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab C82 pier for concrete base

When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed on the mount touches the tripod. Using the pier, you can safely use your instrument!

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab Cable Locking Clip (CLC) for ALTO

PLL_PLLALTOLOCK

PrimaLuceLab Cable Locking Clip (CLC) for ALTO

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab Cable Locking Clip (CLC) for GIOTTO

PLL_PLLGIOTTOLOCK

PrimaLuceLab Cable Locking Clip (CLC) for GIOTTO

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab Counterweight PLUS 1Kg

PLL_PLL-CONTRPLUS

This PrimaLuceLab 1 Kg counterweight allow easier balance of the optical tubes . It can be installed both side, on the front or rear optics of any instrument .

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 100mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 100mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 120mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 120mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 150mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 150mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 180mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 200mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 200mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 250mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 250mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 280mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 280mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 300mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 300mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 350mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 450mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 450mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 50mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 60mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 60mm diameter telescopes can...

Robtics PrimaLuceLab

Dauwbescherming

PrimaLuceLab Dew Heater Element for 80mm diameter telescopes

The PrimaLuceLab dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 80mm diameter telescopes can...

Robtics PrimaLuceLab

Nowy

Observatories

PrimaLuceLab DUAL-COMPACT Observatory Station with 3m dome

PLL_PLLDUALCMP1

DUAL-COMPACT is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide an affordable solution for remote space exploration and astronomy education. It's composed by an Alt-Az mount installed on a heavy pier, supporting 2 optical telescopes in parallel, one with a short focal length and one with a long focal length, with...

Robtics PrimaLuceLab

Nowy

Observatories

PrimaLuceLab DUAL-PRO Observatory Station with 3m dome

PLL_PLLDUALPRO1

DUAL-PRO is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide a professional level but compact solution that can be used for many applications: remote space exploration, space situational awareness, astrophotography and astronomy education/outreach. DUAL-PRO includes a very high precision and load capacity alt-az...

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab DX finder base

DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.

Robtics PrimaLuceLab

Nowy

Caps & Plugs

PrimaLuceLab EAGLE EYE lens cap

PrimaLuceLab EAGLE EYE lens cap

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle power cable with Anderson connector with 16A fuse- 250cm

In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab EAGLE type connector for 3A power OUT ports

PrimaLuceLab EAGLE type connector for 3A power OUT ports allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab EAGLE type connector for power IN and 5A or 8A power OUT ports

PrimaLuceLab EAGLE type connector for power IN and 5A or 8A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for accessories with cigarette plug - 30cm - 3A

The PrimaLuceLab Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A

The PrimaLuceLab Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Astro-Physics mounts with CP1/CP2/CP3...

The PrimaLuceLab Eagle control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Astro-Physics mounts with CP4 controller 8A

The PrimaLuceLab Eagle control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Canon EOS 1100D, 1200D, 1300D 3A

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the PrimaLuceLab Eagle (also Eagle Core) in place of the battery.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Canon EOS 550D, 600D, 650D, 700D 3A

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the PrimaLuceLab Eagle (also Eagle Core) in place of the battery.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Canon EOS 750D, 760D 3A

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the PrimaLuceLab Eagle (also Eagle Core) in place of the battery.

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for FLI camera - 115cm 8A

The PrimaLuceLab Eagle control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the8A plug with screw to prevent being disconnected accidentally...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for Nikon D3100, D3200, D3300, D5100, D5200,...

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the PrimaLuceLab Eagle (also Eagle Core) in place of the battery.

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SBIG ALUMA AC2020 and AC4040 camera -...

The EAGLE control unit can directly power supply ALUMA AC4040 and ALUMA AC 2020 cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being...

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SBIG ALUMA CCD and STC CMOS - 115cm 8A

The EAGLE control unit can directly power supply SBIG ALUMA CCD and STC CMOS cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SBIG StarChaser - 115cm 3A

The EAGLE control unit can directly power supply SBIG StarChaser cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SBIG STL and STXL camera - 115cm 8A

The PrimaLuceLab Eagle control unit can directly power supply SBIG STL and STXL camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SBIG STT and STF CCD camera - 115cm 8A

The PrimaLuceLab Eagle control unit can directly power supply SBIG STT and STF CCD camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts -...

The PrimaLuceLab Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SkyWatcher EQ6-R and EQ8-R mounts - 115cm 8A

The PrimaLuceLab Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A

The PrimaLuceLab Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

Robtics PrimaLuceLab

Cables

PrimaLuceLab Eagle-compatible power cable Losmandy mounts with Gemini2

PLL_EAGLE-CAL-LOSM

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

This PrimaLuceLab Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power these devices like SkyWatcher EQ6,...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

This PrimaLuceLab Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI...

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw -...

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A port

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw -...

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A port

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

This PrimaLuceLab Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and...

Robtics PrimaLuceLab

Power Supplies

PrimaLuceLab Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

This PrimaLuceLab Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power Y cable for 3A port

PrimaLuceLab Eagle-compatible power Y cable for 3A port

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab Eagle-compatible power Y cable for 8A port

PrimaLuceLab Eagle-compatible power Y cable for 8A port

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Nowy

Remote Operation

Primalucelab EAGLE6 - Computer for telescopes and astrophotography

The EAGLE6 is an all-in-one computer for telescopes and astrophotography, combining powerful features to simplify remote control and power management while allowing you to use astronomy devices and Windows software of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management.Advanced...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Nowy

Remote Operation

Primalucelab EAGLE6 PRO - Computer for telescopes and astrophotography

The EAGLE6 PRO provides top-class performance with a fast i5 processor, industrial-grade 16GB DDR4 RAM, large 512GB SSD, and Thunderbolt 4 connectivity for even higher-speed data transfer. High-performance astrophotography computer with Windows 11 IoT Enterprise, Intel i5 processor, 16GB RAM, 512GB SSD, Thunderbolt 4 connectivity, USB 3.2 and USB-C ports,...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Nowy

Remote Operation

Primalucelab EAGLE6 S - Computer for telescopes and astrophotography

The EAGLE6 S is a more powerful version of the EAGLE6, featuring an Intel i3 processor, 8GB of fast RAM, a larger 256GB SSD, and the addition of Thunderbolt interface for even higher-speed connectivity. Enhanced performance astrophotography computer with Windows 11 IoT Enterprise, Intel i3 processor, 8GB RAM, 256GB SSD, Thunderbolt interface, USB 3.2 and...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Nowy

Remote Operation

Primalucelab EAGLE6 XTM - Computer for telescopes and astrophotography

The EAGLE6 XTM is the most powerful computer for telescopes and astrophotography, featuring a blazing-fast i7 processor, industrial-grade 32GB DDR4 RAM, huge 2TB SSD, and Thunderbolt 4 connectivity for ultra-fast data transfer. Ultimate performance astrophotography computer with Windows 11 IoT Enterprise, Intel i7 processor, 32GB RAM, 2TB SSD, Thunderbolt...

Robtics PrimaLuceLab

Nowy

Power Supplies

PrimaLuceLab ECCO-NTC adapter for Dew Heater Rings

ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe.

Robtics PrimaLuceLab

Remote Operation

PrimaLuceLab ECCO, environmental computerized controller for EAGLE

PrimaLuceLab ECCO is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity of the air around your telescope and the temperature of your lenses by calculating the...

Robtics PrimaLuceLab

Nowy

Remote Operation

PrimaLuceLab ECCO2, environmental computerized controller for EAGLE

ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab EQ6 / EQ6-R / AZ-EQ6 adapter for C120 pier

PrimaLuceLab EQ6 / EQ6-R / AZ-EQ6 adapter for C120 pier

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS Adapter plate

PrimaLuceLab EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS adapter plate

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab EQ8 adapter for C120 pier

PrimaLuceLab EQ8 adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab ESATTO 2" focuser with ARCO 2" rotator

PLL_PLLEST2ARCO2

PrimaLuceLab ESATTO 2" focuser with ARCO 2" rotator

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab ESATTO 2" LP focuser with ARCO 2" rotator

PLL_PLLEST2LPARCO2

PrimaLuceLab ESATTO 2" LP focuser with ARCO 2" rotator

Nowy

Focusers

PrimaLuceLab ESATTO 2" LP low profile robotic focuser

PLL_PLLEST2LP-B

PrimaLuceLab ESATTO 2" LP low profile robotic focuser

Robtics PrimaLuceLab

Focusers

PrimaLuceLab ESATTO 2" robotic microfocuser

PrimaLuceLab ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2" version of the ESATTO 2" has 51mm free aperture, 15mm of draw tube travel, 5kg load capacity...

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab ESATTO 3.5" LP focuser with ARCO 3" rotator

PLL_PLLEST35LPARCO3

This bundle includes the ESATTO 3,5" LP low profile focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 58mm of thickness and 76.3mm of free aperture.

Nowy

Focusers

PrimaLuceLab ESATTO 3.5" LP low profile robotic focuser

PLL_PLLEST35LP-B

ESATTO 3,5" LP is the most advanced yet affordable low profile robotic focuser specially designed for the most demanding astrophotography! At just 32mm of thickness, ESATTO 3,5" LP provides a large 90mm free aperture with 10mm of travel, impressive 10 kg of payload capacity and an astounding resolution of 0.01 microns per step! ESATTO 3,5" LP has been...

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab ESATTO 3" focuser with ARCO 3" rotator

PLL_PLLEST3ARCO3

PrimaLuceLab ESATTO 3" focuser with ARCO 3" rotator

Robtics PrimaLuceLab

Focusers

PrimaLuceLab ESATTO 3" robotic microfocuser

PrimaLuceLab ESATTO robotic microfocuser is also available in a larger 3" version: 76mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and...

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab ESATTO 4" focuser with ARCO 3" rotator

PLL_PLLEST4ARCO3

PrimaLuceLab ESATTO 4" focuser with ARCO 3" rotator

Robtics PrimaLuceLab

Focusers

PrimaLuceLab ESATTO 4" robotic microfocuser

PrimaLuceLab ESATTO 4" is the large dimensions robotic microfocuser that we designed for observatory class telescopes or for astrographs that need for large free aperture, like the Takahashi FSQ-106. Compared to the smaller models, ESATTO 4" offers a larger free aperture of 102mm, a longer draw tube travel of 35mm and a higher payload capacity of 10 kg,...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Flexible bushing for SESTO SENSO 2

PrimaLuceLab Flexible bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 120 Smart Flat Field Generator

PLL_PLLGIOTTO120

GIOTTO is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes. GIOTTO is provided with integrated electronics...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 120 with ALTO-1 telescope cover motor

PLL_PLLGIOTTO120ALTO1

PrimaLuceLab GIOTTO 120 with ALTO-1 telescope cover motor

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 150 Smart Flat Field Generator

PLL_PLLGIOTTO150

GIOTTO 150 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 150mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 150 with ALTO-1 telescope cover motor

PLL_PLLGIOTTO150ALTO1

PrimaLuceLab GIOTTO 150 with ALTO-1 telescope cover motor

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 185 Smart Flat Field Generator

PLL_PLLGIOTTO185

PrimaLuceLab GIOTTO 185 Smart Flat Field Generator

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 185 with ALTO-1 telescope cover motor

PLL_PLLGIOTTO185ALTO1

PrimaLuceLab GIOTTO 185 with ALTO-1 telescope cover motor

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 220 Smart Flat Field Generator

PLL_PLLGIOTTO220

GIOTTO 220 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 220mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 220 with ALTO-1 telescope cover motor

PLL_PLLGIOTTO220ALTO1

PrimaLuceLab GIOTTO 220 with ALTO-1 telescope cover motor

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 255 Smart Flat Field Generator

PLL_PLLGIOTTO255

GIOTTO 255 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 255mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 255 with ALTO-2 telescope cover motor

PLL_PLLGIOTTO255ALTO2

PrimaLuceLab GIOTTO 255 with ALTO-2 telescope cover motor

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 285 Smart Flat Field Generator

PLL_PLLGIOTTO285

GIOTTO 285 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 285mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 285 with ALTO-2 telescope cover motor

PLL_PLLGIOTTO285ALTO2

PrimaLuceLab GIOTTO 285 with ALTO-2 telescope cover motor

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Flat Field Generator

Primalucelab GIOTTO 320 Smart Flat Field Generator

PLL_PLLGIOTTO320

GIOTTO 320 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 320mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 320 with ALTO-2 telescope cover motor

PLL_PLLGIOTTO320ALTO2

PrimaLuceLab GIOTTO 320 with ALTO-2 telescope cover motor

Robtics PrimaLuceLab

Flat Field Generator

Primalucelab GIOTTO 430 Smart Flat Field Generator

PLL_PLLGIOTTO430

GIOTTO 430 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 430mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 430 with ALTO-3 telescope cover motor

PLL_PLLGIOTTO430ALTO3

PrimaLuceLab GIOTTO 430 with ALTO-3 telescope cover motor

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 560 with ALTO-3L telescope cover motor

PLL_PLLGIOTTO560ALTO3L

PrimaLuceLab GIOTTO 560 with ALTO-3L telescope cover motor

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO 560mm Smart Flat Field Generator

PLL_PLLGIOTTO560

PrimaLuceLab GIOTTO 560mm Smart Flat Field Generator

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab GIOTTO Smart Flat Field Generator - custom version

PLL_PLLGIOTTOCUSTOM

PrimaLuceLab GIOTTO Smart Flat Field Generator - custom version

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab GM1000 adapter for C120 pier

PLL_C120-GM1000

PrimaLuceLab GM1000 adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab GM2000 adapter for C120 pier

PLL_C120-GM2000

PrimaLuceLab GM2000 adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab GM3000 adapter for C120 pier

PLL_C120-GM3000

PrimaLuceLab GM3000 adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Remote Operation

PrimaLuceLab GPS antenna for EAGLE4

PrimaLuceLab GPS antenna for EAGLE4

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Green color bushing for SESTO SENSO 2

PrimaLuceLab Green color bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Grey color bushing for SESTO SENSO 2

PrimaLuceLab Grey color bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab Guide Rings PLUS 115mm

PLL_PLLANGU115P

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The PrimaLuceLab Guide rings PLUS 115mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 80mm diameter refractors. Like all the other elements...

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab Guide Rings PLUS 80mm

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors. Like all the other elements of the PLUS...

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab Guide rings support plate for ECCO

PrimaLuceLab Guide rings support plate for ECCO

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab Guide scope support for ECCO

PrimaLuceLab ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab HEQ5, Sirius EQ-G PLUS Adapter plate

PrimaLuceLab HEQ5, Sirius EQ-G PLUS adapter plate

Robtics PrimaLuceLab

Nowy

Radio Astronomy

PrimaLuceLab INTREPID 500-12 5.0m ground station antenna system for S/X-band

PLL_INTREPID500-12

PrimaLuceLab INTREPID 500-12 5.0m ground station antenna system for S/X-band

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy plate 140mm PLUS

The PrimaLuceLab Losmandy style dovetail plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Losmandy plate (as the SkyWatcher SkyWatcher AZ-EQ6, or EQ8). Like all the elements of...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy plate 240mm PLUS

The PrimaLuceLab Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy plate 350mm PLUS

The PrimaLuceLab Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy plate 495mm PLUS

The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy PLUS dovetail bar with curved blocks for C8 or EdgeHD 800 and...

PLL_PLLLOS350SAG8_

This kit, composed of PrimaLuceLab plate 350mm PLUS Losmandy style dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the Celestron C8 or EdgeHD 800 telescopes or Meade SC and ACF 8" telescopes.

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab Losmandy style dovetail plate 645mm PLUS

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab Losmandy style dovetail plate 915mm PLUS

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11,...

PLL_PLLLOS495SAG925_

This kit, composed of PrimaLuceLab plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M110 10mm extension tube for ESATTO 4"

PrimaLuceLab M110 10mm extension tube for ESATTO 4"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M110 35mm extension tube for ESATTO 4"

PrimaLuceLab M110 35mm extension tube for ESATTO 4"

Robtics PrimaLuceLab

Adapters

PrimaLuceLab M48 female to T2 male Adapter

M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab M48 male to T2 female Adapter

The M48 male to T2 female adapter allows you to connect accessories with M48 thread (48x0.75 female) to those with T2 thread (42x0,75 male). Sometimes in fact the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M48 spacer 0.5mm

PrimaLuceLab M48 spacer 0,5mm

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M48 spacer 1 mm

PrimaLuceLab M48 spacer 1 mm

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M48-50.8mm photographic adapter

The M48-50,8mm photographic adapter connects to all cameras and accessories with female M48x0,75 thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M48x0.75 female adapter for ARCO 2"

PrimaLuceLab M48x0.75 female adapter for ARCO 2"

Robtics PrimaLuceLab

Adapters

PrimaLuceLab M56 15mm extension tube for ESATTO 2"

The M56 15mm extension tube can be directly threaded to the PrimaLuceLab ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm thickness, it's made up of aluminum, black anodized and it has a M56 female on the camera side this way you can connect all the ESATTO 2"...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M56x1 male adapter for ARCO 2"

PrimaLuceLab M56x1 male adapter for ARCO 2"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M63x1 adapter for ARCO 3"

PrimaLuceLab M63x1 adapter for ARCO 3"

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M65x1 adapter for ARCO 3"

M65x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 65x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. Optical thickness of this adapter is 3.5mm.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab M81 25mm extension tube for ESATTO 3"

The M81 25mm extension tube can be directly threaded to the PrimaLuceLab ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3"...

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab M86x1 adapter for ARCO 3"

PrimaLuceLab M86x1 adapter for ARCO 3"

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Maxi Dovetail Clamp Vixen+Losmandy PLUS

The PrimaLuceLab Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of...

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab Observatory Dovetail Clamp Vixen+Losmandy PLUS

The Observatory dovetail clamp Vixen+Losmandy PLUS is designed to support heavy telescopes that come with Vixen or Losmandy style dovetail bar. The Observatory version of PLUS dovetail clamps is 280mm long and it comes with 4 locking blocks to safely lock even large telescopes. The Observatory Dovetail Clamp Vixen+Losmandy PLUS is provided with threaded...

Robtics PrimaLuceLab

Nowy

Zuilen

PrimaLuceLab Paramount MX adapter for C120 pier

PrimaLuceLab Paramount MX adapter for C120 pier

Robtics PrimaLuceLab

Nowy

Books, atlases, software

PrimaLuceLab PLAY - Prima Luce Astrophotography software

PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...

View

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab PLUS 10mm spacers

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab PLUS 20mm spacers

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab PLUS 30mm spacers

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 30mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or...

If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab PLUS dovetail clamp with 1 Kg counterweight

PLL_PLL-CONTRPLUS-M

The PrimaLuceLab dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as...

Robtics PrimaLuceLab

Nowy

Mounting Hardware

PrimaLuceLab PLUS dovetail clamp with 1 Kg counterweight

PLL_PLL-CONTRPLUS-M_

Robtics PrimaLuceLab

Mounting Hardware

PrimaLuceLab PLUS raisers for EAGLE CORE

PLL_EAGLECORE-DI

PrimaLuceLab PLUS raisers for EAGLE CORE allow you to install, on the side of its body, the 80mm PLUS guide rings without them to touch the EAGLE CORE body. This way you can install the guide scope on the side and fix the DSLR camera with its photo lens on top. This is the way to use your DSLR camera to record long exposure astrophotography of deep-sky...

Robtics PrimaLuceLab

Nowy

Focusers

PrimaLuceLab Red color bushing for SESTO SENSO 2

PrimaLuceLab Red color bushing for SESTO SENSO 2

Robtics PrimaLuceLab

Adapters

PrimaLuceLab SESTO SENSO 2 26mm Adapter

PLL_SESTOSENSO-AD26II

This 26mm adapter allows you to install PrimaLuceLab SESTO SENSO 2 on focusers that come with a 26mm diameter shaft, like focusers from Explorer Scientific (or other focusers with a 26mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab SESTO SENSO 2 33mm Adapter

PLL_SESTOSENSO-AD33II

This 33mm adapter allows you to install PrimaLuceLab SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it...

Robtics PrimaLuceLab

Adapters

PrimaLuceLab SESTO SENSO 2 37mm Adapter

PLL_SESTOSENSO-AD37II

This 37mm adapter allows you to install PrimaLuceLab SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to...

Robtics PrimaLuceLab

Focusers

PrimaLuceLab SESTO SENSO 2 robotic focusing motor

PLL_SESTOSENSOII

PrimaLuceLab SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don't want to focus using a computer, you can connect wirelessly...

Robtics PrimaLuceLab

Nowy

Flat Field Generator

PrimaLuceLab Set 3 locking screws for GIOTTO

PLL_PLLGIOTTOSCR

PrimaLuceLab Set 3 locking screws for GIOTTO

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Losmandy plate 240mm PLUS

PLL_PLLPDLOS240P_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Losmandy plate 240mm PLUS large dovetail clamps

PLL_PLLPDLOS240PL_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Losmandy plate 350mm PLUS

PLL_PLLPDLOS350P_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Losmandy plate 350mm PLUS large dovetail clamps

PLL_PLLPDLOS350PL_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Losmandy plate 495mm PLUS maxi dovetail clamps

PLL_PLLPDLOS495PM_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Vixen plate 240mm PLUS

PLL_PLLPDVIX240P_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Side by side Vixen plate 350mm PLUS

PLL_PLLPDVIX350P_

The PrimaLuceLab side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab small Dovetail Clamp Vixen+Losmandy PLUS

The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). Our dovetail clamps, unlike the common ones, offer...

Robtics PrimaLuceLab

Nowy

Radio Astronomy

PrimaLuceLab SPIDER 230C compact radio telescope, kit without mount

PLL_SPIDER230C-KIT

PrimaLuceLab SPIDER 230C compact radio telescope, kit without mount

Robtics PrimaLuceLab

Nowy

Radio Astronomy

PrimaLuceLab SPIDER 300A MarkII advanced radio telescope

PrimaLuceLab SPIDER 300A MarkII advanced radio telescope

Robtics PrimaLuceLab

Nowy

Radio Astronomy

PrimaLuceLab SPIDER 500A MarkII professional radio telescope

PrimaLuceLab SPIDER 500A MarkII professional radio telescope

Robtics PrimaLuceLab

Adapters

PrimaLuceLab T2 spacer 0.5mm

T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.

Robtics PrimaLuceLab

Adapters

PrimaLuceLab T2 spacer 1mm

T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab T2-50.8mm photographic adapter

The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter.

Robtics PrimaLuceLab

Focusers

PrimaLuceLab Temperature sensor for ECCO, SESTO SENSO and ESATTO

PLL_SESTOSENSO-TEMP

This temperature sensor is compatible both with PrimaLuceLab ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO, the robotic focusing motor for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Vixen plate 140mm PLUS

The PrimaLuceLab Vixen style dovetail plate 140mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 140mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Vixen plate 240mm PLUS

The PrimaLuceLab Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Vixen plate 90mm PLUS

The PrimaLuceLab Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical...

Robtics PrimaLuceLab

Robtics PrimaLuceLab 2

Mounting Hardware

PrimaLuceLab Vixen style dovetail plate 350mm PLUS

The PrimaLuceLab Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 350mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical...

Robtics PrimaLuceLab

Nowy

Remote Operation

PrimaLuceLab WiFi antennas for EAGLE

PrimaLuceLab WiFi antennas for EAGLE

Robtics PrimaLuceLab

Nowy

Adapters

PrimaLuceLab Yellow color bushing for SESTO SENSO 2

PrimaLuceLab Yellow color bushing for SESTO SENSO 2

Product added to wishlist